xdelta/diy/xdelta3-main.h

/* xdelta 3 - delta compression tools and library
 * Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007,
 * Joshua P. MacDonald
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

/* This is all the extra stuff you need for convenience to users in a command line
 * application.  It contains these major components:
 *
 * 1. VCDIFF tools
 * 2. external compression support (this is POSIX-specific).
 * 3. a general read/write loop that handles all of the Xdelta decode/encode/VCDIFF-print
 *    functions
 * 4. command-line interpreter
 * 5. an Xdelta application header which stores default filename, external compression settings
 * 6. output/error printing
 * 7. basic file support and OS interface
 */

/* TODO list:
 * 1. do exact gzip-like filename, stdout handling.  make a .vcdiff extension, refuse
 *    to encode to stdout without -cf, etc.
 * 2. Allow the user to add a comment string to the app header without disturbing the default
 *    behavior.
 * 3. "Source file must be seekable" is not actually true for encoding, given current
 *    behavior.  Allow non-seekable sources?  It would in theory let you use a fifo for
 *    the source.
 */

/* On error handling and printing:
 *
 * The xdelta library sets stream->msg to indicate what condition caused an internal
 * failure, but many failures originate here and are printed here.  The return convention
 * is 0 for success, as throughout Xdelta code, but special attention is required here for
 * the operating system calls with different error handling.  See the main_file_* routines.
 * All errors in this file have a message printed at the time of occurance.  Since some of
 * these calls occur within calls to the library, the error may end up being printed again
 * with a more general error message.
 */

/******************************************************************************************/

#ifndef XD3_POSIX
#define XD3_POSIX 0
#endif
#ifndef XD3_STDIO
#define XD3_STDIO 0
#endif
#ifndef XD3_WIN32
#define XD3_WIN32 0
#endif

/* Combines xd3_strerror() and strerror() */
const char* xd3_mainerror(int err_num);

/* XPRINTX (used by main) prefixes an "xdelta3: " to the output. */
#define XPR fprintf
#define NT stderr, "xdelta3: "

/* If none are set, default to posix. */
#if (XD3_POSIX + XD3_STDIO + XD3_WIN32) == 0
#undef XD3_POSIX
#define XD3_POSIX 1
#endif

/* Handle externally-compressed inputs. */
#ifndef EXTERNAL_COMPRESSION
#define EXTERNAL_COMPRESSION 1
#endif

#define PRINTHDR_SPECIAL -4378291

/* The number of soft-config variables.  */
#define XD3_SOFTCFG_VARCNT 7

/* this is used as in XPR(NT XD3_LIB_ERRMSG (stream, ret)) to print an error message
 * from the library. */
#define XD3_LIB_ERRMSG(stream, ret) "%s: %s\n", xd3_errstring (stream), xd3_mainerror (ret)

#include <stdio.h>  /* fprintf */

#if XD3_POSIX
#include <unistd.h> /* close, read, write... */
#include <sys/types.h>
#include <fcntl.h>
#endif

#ifndef _WIN32
#include <unistd.h> /* lots */
#include <sys/time.h> /* gettimeofday() */
#include <sys/stat.h> /* stat() and fstat() */
#else
#define strtoll _strtoi64
#include <sys/types.h>
#include <sys/stat.h>
#ifndef WIFEXITED
#   define WIFEXITED(stat)  (((*((int *) &(stat))) & 0xff) == 0)
#endif
#ifndef WEXITSTATUS
#   define WEXITSTATUS(stat) (((*((int *) &(stat))) >> 8) & 0xff)
#endif
#ifndef S_ISREG
//#   ifdef S_IFREG
//#       define S_ISREG(m) (((m) & S_IFMT) == S_IFREG)
//#   else
#       define S_ISREG(m) 1
//#   endif
#endif /* !S_ISREG */

// For standard input/output handles
static STARTUPINFO winStartupInfo;
#endif

/******************************************************************************************
 ENUMS and TYPES
 ******************************************************************************************/

/* These flags (mainly pertaining to main_read() operations) are set in the
 * main_file->flags variable.  All are related to with external decompression support.
 *
 * RD_FIRST causes the external decompression check when the input is first read.
 *
 * RD_NONEXTERNAL disables external decompression for reading a compressed input, in the
 * case of Xdelta inputs.  Note: Xdelta is supported as an external compression type,
 * which makes is the reason for this flag.  An example to justify this is: to create a
 * delta between two files that are VCDIFF-compressed.  Two external Xdelta decoders are
 * run to supply decompressed source and target inputs to the Xdelta encoder. */
typedef enum
{
  RD_FIRST        = (1 << 0),
  RD_NONEXTERNAL  = (1 << 1),
  RD_EXTERNAL_V1  = (1 << 2),
} xd3_read_flags;

/* main_file->mode values */
typedef enum
{
  XO_READ  = 0,
  XO_WRITE = 1,
} main_file_modes;

/* Main commands.  For example, CMD_PRINTHDR is the "xdelta printhdr" command. */
typedef enum
{
  CMD_NONE = 0,
  CMD_PRINTHDR,
  CMD_PRINTHDRS,
  CMD_PRINTDELTA,
#if XD3_ENCODER
  CMD_ENCODE,
#endif
  CMD_DECODE,
  CMD_TEST,
  CMD_CONFIG,
} xd3_cmd;

#if XD3_ENCODER
#define CMD_DEFAULT CMD_ENCODE
#define IS_ENCODE(cmd) (cmd == CMD_ENCODE)
#else
#define CMD_DEFAULT CMD_DECODE
#define IS_ENCODE(cmd) (0)
#endif

typedef struct _main_file        main_file;
typedef struct _main_extcomp     main_extcomp;
typedef struct _main_blklru      main_blklru;
typedef struct _main_blklru_list main_blklru_list;

/* The main_file object supports abstract system calls like open, close, read, write, seek,
 * stat.  The program uses these to represent both seekable files and non-seekable files.
 * Source files must be seekable, but the target input and any output file do not require
 * seekability.
 */
struct _main_file
{
#if XD3_STDIO
  FILE               *file;
#elif XD3_POSIX
  int                 file;
#elif XD3_WIN32
  HANDLE              file;
#endif

  int                 mode;          /* XO_READ and XO_WRITE */
  const char         *filename;      /* File name or /dev/stdin, /dev/stdout, /dev/stderr. */
  char               *filename_copy; /* File name or /dev/stdin, /dev/stdout, /dev/stderr. */
  const char         *realname;      /* File name or /dev/stdin, /dev/stdout, /dev/stderr. */
  const main_extcomp *compressor;    /* External compression struct. */
  int                 flags;         /* RD_FIRST, RD_NONEXTERNAL, ... */
  xoff_t              nread;         /* for input position */
  xoff_t              nwrite;        /* for output position */
  uint8_t            *snprintf_buf;  /* internal snprintf() use */
};

/* Various strings and magic values used to detect and call external compression.  See
 * below for examples. */
struct _main_extcomp
{
  const char    *recomp_cmdname;
  const char    *recomp_options;

  const char    *decomp_cmdname;
  const char    *decomp_options;

  const char    *ident;
  const char    *magic;
  int            magic_size;
  int            flags;
};

/* This file implements a small LRU of source blocks.  For encoding purposes,
 * we prevent paging in blocks we've already scanned in the source (return
 * XD3_NOTAVAIL). */
struct _main_blklru_list
{
  main_blklru_list  *next;
  main_blklru_list  *prev;
};

struct _main_blklru
{
  uint8_t         *blk;
  xoff_t           blkno;
  main_blklru_list  link;
};

#define LRU_SIZE 32U
#define XD3_MINSRCWINSZ XD3_ALLOCSIZE

/* ... represented as a list (no cache index). */
XD3_MAKELIST(main_blklru_list,main_blklru,link);

// TODO:
// struct _main_state
// {

/* Program options: various command line flags and options. */
static int         option_stdout             = 0;
static int         option_force              = 0;
static int         option_verbose            = 0;
static int         option_quiet              = 0;
static int         option_use_appheader      = 1;
static uint8_t*    option_appheader          = NULL;
static int         option_use_secondary      = 0;
static char*       option_secondary          = NULL;
static int         option_use_checksum       = 1;
static int         option_use_altcodetable   = 0;
static char*       option_smatch_config      = NULL;
static int         option_no_compress        = 0;
static int         option_no_output          = 0; /* do not open or write output */
static const char *option_source_filename    = NULL;

static int         option_level              = XD3_DEFAULT_LEVEL;
static usize_t     option_iopt_size          = XD3_DEFAULT_IOPT_SIZE;
static usize_t     option_winsize            = XD3_DEFAULT_WINSIZE;
static usize_t     option_srcwinsz           = XD3_DEFAULT_SRCWINSZ;
static usize_t     option_sprevsz            = XD3_DEFAULT_SPREVSZ;

/* These variables are supressed to avoid their use w/o support.  main() warns
 * appropriately. */
#if EXTERNAL_COMPRESSION
static int         option_decompress_inputs  = 1;
static int         option_recompress_outputs = 1;
#endif

/* This is for comparing "printdelta" output without attention to
 * copy-instruction modes. */
#if VCDIFF_TOOLS
static int         option_print_cpymode = 1;
#endif

/* Static variables */
IF_DEBUG(static int main_mallocs = 0;)

static char*          program_name = NULL;
static uint8_t*       appheader_used = NULL;
static uint8_t*       main_bdata = NULL;

/* The LRU: obviously this is shared by all callers. */
static int               lru_size = 0;
static main_blklru      *lru = NULL;  /* array of lru_size elts */
static main_blklru_list  lru_list;
static main_blklru_list  lru_free;
static int               do_not_lru = 0;  /* set to avoid lru, instead discard oldest */

static int lru_hits   = 0;
static int lru_misses = 0;
static int lru_filled = 0;

/* Hacks for VCDIFF tools */
static int allow_fake_source = 0;

/* This array of compressor types is compiled even if EXTERNAL_COMPRESSION is false just so
 * the program knows the mapping of IDENT->NAME. */
static main_extcomp extcomp_types[] =
{
  /* The entry for xdelta3 must be 0 because the program_name is set there. */
  { "xdelta3",  "-cfq",  "xdelta3",    "-dcfq",  "X", "\xd6\xc3\xc4", 3, RD_NONEXTERNAL },
  { "bzip2",    "-cf",   "bzip2",      "-dcf",   "B", "BZh",          3, 0 },
  { "gzip",     "-cf",   "gzip",       "-dcf",   "G", "\037\213",     2, 0 },
  { "compress", "-cf",   "uncompress", "-cf",    "Z", "\037\235",     2, 0 },

  /* TODO: add commandline support for magic-less formats */
  /*{ "lzma",     "-cf",   "lzma",       "-dcf",   "M", "]\000",        2, 0 },*/
};

// };

static void main_get_appheader (xd3_stream *stream, main_file *ifile,
                                main_file *output, main_file *sfile);

static int main_help (void);

static int
main_version (void)
{
  /* $Format: "  DP(RINT \"VERSION=3.$Xdelta3Version$\\n\");" $ */
  DP(RINT "VERSION=3.0q\n");
  return EXIT_SUCCESS;
}

static int
main_config (void)
{
  main_version ();

  DP(RINT "EXTERNAL_COMPRESSION=%d\n", EXTERNAL_COMPRESSION);
  DP(RINT "GENERIC_ENCODE_TABLES=%d\n", GENERIC_ENCODE_TABLES);
  DP(RINT "GENERIC_ENCODE_TABLES_COMPUTE=%d\n", GENERIC_ENCODE_TABLES_COMPUTE);
  DP(RINT "REGRESSION_TEST=%d\n", REGRESSION_TEST);
  DP(RINT "SECONDARY_DJW=%d\n", SECONDARY_DJW);
  DP(RINT "SECONDARY_FGK=%d\n", SECONDARY_FGK);
  DP(RINT "VCDIFF_TOOLS=%d\n", VCDIFF_TOOLS);
  DP(RINT "XD3_ALLOCSIZE=%d\n", XD3_ALLOCSIZE);
  DP(RINT "XD3_DEBUG=%d\n", XD3_DEBUG);
  DP(RINT "XD3_ENCODER=%d\n", XD3_ENCODER);
  DP(RINT "XD3_POSIX=%d\n", XD3_POSIX);
  DP(RINT "XD3_STDIO=%d\n", XD3_STDIO);
  DP(RINT "XD3_WIN32=%d\n", XD3_WIN32);
  DP(RINT "XD3_USE_LARGEFILE64=%d\n", XD3_USE_LARGEFILE64);
  DP(RINT "XD3_DEFAULT_LEVEL=%d\n", XD3_DEFAULT_LEVEL);
  DP(RINT "XD3_DEFAULT_IOPT_SIZE=%d\n", XD3_DEFAULT_IOPT_SIZE);
  DP(RINT "XD3_DEFAULT_SPREVSZ=%d\n", XD3_DEFAULT_SPREVSZ);
  DP(RINT "XD3_DEFAULT_SRCWINSZ=%d\n", XD3_DEFAULT_SRCWINSZ);
  DP(RINT "XD3_DEFAULT_WINSIZE=%d\n", XD3_DEFAULT_WINSIZE);
  DP(RINT "XD3_HARDMAXWINSIZE=%d\n", XD3_HARDMAXWINSIZE);
  DP(RINT "XD3_NODECOMPRESSSIZE=%d\n", XD3_NODECOMPRESSSIZE);

  return EXIT_SUCCESS;
}

static void
reset_defaults(void)
{
  option_stdout = 0;
  option_force = 0;
  option_verbose = 0;
  option_quiet = 0;
  option_appheader = NULL;
  option_use_secondary = 0;
  option_secondary = NULL;
  option_use_altcodetable = 0;
  option_smatch_config = NULL;
  option_no_compress = 0;
  option_no_output = 0;
  option_source_filename = NULL;
  program_name = NULL;
  appheader_used = NULL;
  main_bdata = NULL;
  lru_size = 0;
  lru = NULL;
  do_not_lru = 0;
  lru_hits   = 0;
  lru_misses = 0;
  lru_filled = 0;
  allow_fake_source = 0;
  option_smatch_config = NULL;

  option_use_appheader = 1;
  option_use_checksum = 1;
#if EXTERNAL_COMPRESSION
  option_decompress_inputs  = 1;
  option_recompress_outputs = 1;
#endif
#if VCDIFF_TOOLS
  option_print_cpymode = 1;
#endif
  option_level = XD3_DEFAULT_LEVEL;
  option_iopt_size = XD3_DEFAULT_IOPT_SIZE;
  option_winsize = XD3_DEFAULT_WINSIZE;
  option_srcwinsz = XD3_DEFAULT_SRCWINSZ;
  option_sprevsz = XD3_DEFAULT_SPREVSZ;
}

static void*
main_malloc1 (usize_t size)
{
  void* r = malloc (size);
  if (r == NULL) { XPR(NT "malloc: %s\n", xd3_mainerror (ENOMEM)); }
  else if (option_verbose > 3) { XPR(NT "malloc: %u: %p\n", size, r); }
  return r;
}

static void*
main_malloc (usize_t size)
{
  void *r = main_malloc1 (size);
   if (r) { IF_DEBUG (main_mallocs += 1); }
  return r;
}

static void*
main_alloc (void   *opaque,
            usize_t  items,
            usize_t  size)
{
  return main_malloc1 (items * size);
}

static void
main_free1 (void *opaque, void *ptr)
{
  if (option_verbose > 3) { XPR(NT "free: %p\n", ptr); }
  free (ptr);
}

static void
main_free (void *ptr)
{
  if (ptr)
    {
      IF_DEBUG (main_mallocs -= 1);
      main_free1 (NULL, ptr);
      IF_DEBUG (XD3_ASSERT(main_mallocs >= 0));
    }
}

/* This ensures that (ret = errno) always indicates failure, in case errno was
 * accidentally not set.  If this prints there's a bug somewhere. */
static int
get_errno (void)
{
#ifndef _WIN32
  if (errno == 0)
    {
      XPR(NT "you found a bug: expected errno != 0\n");
      errno = XD3_INTERNAL;
    }
  return errno;
#else
  DWORD errNum = GetLastError();
  if (errNum == NO_ERROR) {
          errNum = XD3_INTERNAL;
  }
  return errNum;
#endif
}

const char*
xd3_mainerror(int err_num) {
#ifndef _WIN32
        const char* x = xd3_strerror (err_num);
        if (x != NULL) {
                return x;
        }
        return strerror(err_num);
#else
        static char err_buf[256];
        const char* x = xd3_strerror (err_num);
        if (x != NULL) {
                return x;
        }
        memset (err_buf, 0, 256);
        FormatMessage (FORMAT_MESSAGE_FROM_SYSTEM | FORMAT_MESSAGE_IGNORE_INSERTS,
                NULL, err_num,
                MAKELANGID (LANG_NEUTRAL, SUBLANG_DEFAULT),
                err_buf, 256, NULL);
        return err_buf;
#endif
}

static long
get_millisecs_now (void)
{
#ifndef _WIN32
  struct timeval tv;

  gettimeofday (& tv, NULL);

  return (tv.tv_sec) * 1000L + (tv.tv_usec) / 1000;
#else
  // Found this in an example on www.codeproject.com
  // It doesn't matter that the offset is Jan 1, 1601
  // Result is the numbre of 100 nanosecond units
  // 100ns * 10,000 = 1ms
  SYSTEMTIME st;
  FILETIME ft;
  __int64 *pi = (__int64*)&ft;
  GetLocalTime(&st);
  SystemTimeToFileTime(&st, &ft);
  return (long)((*pi) / 10000);
#endif
}

/* Always >= 1 millisec, right? */
static long
get_millisecs_since (void)
{
  static long last = 0;
  long now = get_millisecs_now();
  long diff = now - last;
  last = now;
  return diff;
}

static char*
main_format_bcnt (xoff_t r, char *buf)
{
  static const char* fmts[] = { "B", "KB", "MB", "GB" };
  int i;

  for (i = 0; i < SIZEOF_ARRAY(fmts); i += 1)
    {
      if (r <= (10 * 1024) || i == (-1 + (int)SIZEOF_ARRAY(fmts)))
            {
              sprintf (buf, "%"Q"u %s", r, fmts[i]);
              break;
            }
      r /= 1024;
    }
  return buf;
}

static char*
main_format_rate (xoff_t bytes, long millis, char *buf)
{
  xoff_t r = (xoff_t)(1.0 * bytes / (1.0 * millis / 1000.0));
  static char lbuf[32];

  main_format_bcnt (r, lbuf);
  sprintf (buf, "%s/sec", lbuf);
  return buf;
}

static char*
main_format_millis (long millis, char *buf)
{
  if (millis < 1000)       { sprintf (buf, "%lu ms", millis); }
  else if (millis < 10000) { sprintf (buf, "%.1f sec", millis / 1000.0); }
  else                     { sprintf (buf, "%lu sec", millis / 1000L); }
  return buf;
}

/* A safe version of strtol for xoff_t. */
static int
main_strtoxoff (const char* s, xoff_t *xo, char which)
{
  char *e;
  xoff_t x;

  XD3_ASSERT(s && *s != 0);

  {
    /* Should check LONG_MIN, LONG_MAX, LLONG_MIN, LLONG_MAX? */
#if SIZEOF_XOFF_T == 4
    long xx = strtol (s, &e, 0);
#else
    long long xx = strtoll (s, &e, 0);
#endif

    if (xx < 0)
      {
        XPR(NT "-%c: negative integer: %s\n", which, s);
        return EXIT_FAILURE;
      }

    x = xx;
  }

  if (*e != 0)
    {
      XPR(NT "-%c: invalid integer: %s\n", which, s);
      return EXIT_FAILURE;
    }

  (*xo) = x;
  return 0;
}

static int
main_atou (const char* arg, usize_t *xo, usize_t low, usize_t high, char which)
{
  xoff_t x;
  int ret;

  if ((ret = main_strtoxoff (arg, & x, which))) { return ret; }

  if (x < low)
    {
      XPR(NT "-%c: minimum value: %u\n", which, low);
      return EXIT_FAILURE;
    }
  if (high == 0)
    {
      high = USIZE_T_MAX;
    }
  if (x > high)
    {
      XPR(NT "-%c: maximum value: %u\n", which, high);
      return EXIT_FAILURE;
    }
  (*xo) = (usize_t)x;
  return 0;
}

/******************************************************************************************
 FILE BASICS
 ******************************************************************************************/

/* With all the variation in file system-call semantics, arguments, return values and
 * error-handling for the POSIX and STDIO file APIs, the insides of these functions make
 * me sick, which is why these wrappers exist. */

#define XOPEN_OPNAME (xfile->mode == XO_READ ? "read" : "write")
#define XOPEN_STDIO  (xfile->mode == XO_READ ? "rb" : "wb")
#define XOPEN_POSIX  (xfile->mode == XO_READ ? O_RDONLY : O_WRONLY | O_CREAT | O_TRUNC)
#define XOPEN_MODE   (xfile->mode == XO_READ ? 0 : 0666)

#define XF_ERROR(op, name, ret) \
  XPR(NT "file %s failed: %s: %s: %s\n", (op), XOPEN_OPNAME, (name), xd3_mainerror (ret))

#if XD3_STDIO
#define XFNO(f) fileno(f->file)
#define XSTDOUT_XF(f) { (f)->file = stdout; (f)->filename = "/dev/stdout"; }
#define XSTDIN_XF(f)  { (f)->file = stdin;  (f)->filename = "/dev/stdin"; }

#elif XD3_POSIX
#define XFNO(f) f->file
#define XSTDOUT_XF(f) { (f)->file = STDOUT_FILENO; (f)->filename = "/dev/stdout"; }
#define XSTDIN_XF(f)  { (f)->file = STDIN_FILENO;  (f)->filename = "/dev/stdin"; }

#elif XD3_WIN32
#define XFNO(f) -1
#define XSTDOUT_XF(f) { (f)->file = winStartupInfo.hStdOutput; (f)->filename = "(stdout)"; }
#define XSTDIN_XF(f)  { (f)->file = winStartupInfo.hStdInput;  (f)->filename = "(stdin)"; }
#endif

static void
main_file_init (main_file *xfile)
{
  memset (xfile, 0, sizeof (*xfile));

#if XD3_POSIX
  xfile->file = -1;
#endif
#if XD3_WIN32
  xfile->file = INVALID_HANDLE_VALUE;
#endif
}

static int
main_file_isopen (main_file *xfile)
{
#if XD3_STDIO
  return xfile->file != NULL;

#elif XD3_POSIX
  return xfile->file != -1;

#elif XD3_WIN32
  return xfile->file != INVALID_HANDLE_VALUE;
#endif
}

static int
main_file_close (main_file *xfile)
{
  int ret = 0;

  if (! main_file_isopen (xfile))
    {
      return 0;
    }

#if XD3_STDIO
  ret = fclose (xfile->file);
  xfile->file = NULL;

#elif XD3_POSIX
  ret = close (xfile->file);
  xfile->file = -1;

#elif XD3_WIN32
  if (!CloseHandle(xfile->file)) {
    ret = get_errno ();
  }
  xfile->file = INVALID_HANDLE_VALUE;
#endif

  if (ret != 0) { XF_ERROR ("close", xfile->filename, ret = get_errno ()); }
  return ret;
}

static void
main_file_cleanup (main_file *xfile)
{
  if (main_file_isopen (xfile))
    {
      main_file_close (xfile);
    }

  if (xfile->snprintf_buf != NULL)
    {
      main_free(xfile->snprintf_buf);
      xfile->snprintf_buf = NULL;
    }

  if (xfile->filename_copy != NULL)
    {
      main_free(xfile->filename_copy);
      xfile->filename_copy = NULL;
    }
}

static int
main_file_open (main_file *xfile, const char* name, int mode)
{
  int ret = 0;

  xfile->mode = mode;

  XD3_ASSERT (name != NULL);
  XD3_ASSERT (! main_file_isopen (xfile));
  if (name[0] == 0)
    {
      XPR(NT "invalid file name: empty string\n");
      return XD3_INVALID;
    }

#if XD3_STDIO
  xfile->file = fopen (name, XOPEN_STDIO);

  ret = (xfile->file == NULL) ? get_errno () : 0;

#elif XD3_POSIX
  if ((ret = open (name, XOPEN_POSIX, XOPEN_MODE)) < 0)
    {
      ret = get_errno ();
    }
  else
    {
      xfile->file = ret;
      ret = 0;
    }

#elif XD3_WIN32
  xfile->file = CreateFile(name,
          (mode == XO_READ) ? GENERIC_READ : GENERIC_WRITE,
          FILE_SHARE_READ,
          NULL,
          (mode == XO_READ) ? OPEN_EXISTING : (option_force ? CREATE_ALWAYS : CREATE_NEW),
          FILE_ATTRIBUTE_NORMAL,
          NULL);
  if (xfile->file == INVALID_HANDLE_VALUE) {
          ret = get_errno ();
  }
#endif
  if (ret) { XF_ERROR ("open", name, ret); }
  else     { xfile->realname = name; xfile->nread = 0; }
  return ret;
}

static int
main_file_stat (main_file *xfile, xoff_t *size, int err_ifnoseek)
{
  int ret = 0;
#if XD3_WIN32
  LARGE_INTEGER li;
  if (GetFileSizeEx(xfile->file, &li) == 0) {
          ret = get_errno ();
  } else {
      *size = li.QuadPart;
  }
#else
  struct stat sbuf;
  if (fstat (XFNO (xfile), & sbuf) < 0)
    {
      ret = get_errno ();
      if (err_ifnoseek) { XF_ERROR ("stat", xfile->filename, ret); }
      return ret;
    }

  if (! S_ISREG (sbuf.st_mode))
    {
      if (err_ifnoseek) { XPR(NT "source file must be seekable: %s\n", xfile->filename); }
      return ESPIPE;
    }
  (*size) = sbuf.st_size;
#endif
  return ret;
}

static int
main_file_exists (main_file *xfile)
{
  struct stat sbuf;
  return stat (xfile->filename, & sbuf) == 0 && S_ISREG (sbuf.st_mode);
}

#if (XD3_POSIX || EXTERNAL_COMPRESSION)
/* POSIX-generic code takes a function pointer to read() or write().  This calls the
 * function repeatedly until the buffer is full or EOF.  The NREAD parameter is not
 * set for write, NULL is passed.  Return is signed, < 0 indicate errors, otherwise
 * byte count. */
typedef int (xd3_posix_func) (int fd, uint8_t *buf, usize_t size);

static int
xd3_posix_io (int fd, uint8_t *buf, usize_t size, xd3_posix_func *func, usize_t *nread)
{
  int ret;
  usize_t nproc = 0;

  while (nproc < size)
    {
      int result = (*func) (fd, buf + nproc, size - nproc);

      if (result < 0)
        {
          ret = get_errno ();
          if (ret != EAGAIN && ret != EINTR)
            {
              return ret;
            }
          result = 0;
        }

      if (nread != NULL && result == 0) { break; }

      nproc += result;
    }
  if (nread != NULL) { (*nread) = nproc; }
  return 0;
}
#endif

/* POSIX is unbuffered, while STDIO is buffered.  main_file_read() should always be called
 * on blocks. */
static int
main_file_read (main_file   *ifile,
               uint8_t    *buf,
               usize_t      size,
               usize_t     *nread,
               const char *msg)
{
  int ret = 0;

#if XD3_STDIO
  usize_t result;

  result = fread (buf, 1, size, ifile->file);

  if (result < size && ferror (ifile->file))
    {
      ret = get_errno ();
    }
  else
    {
      *nread = result;
    }

#elif XD3_POSIX
  ret = xd3_posix_io (ifile->file, buf, size, (xd3_posix_func*) &read, nread);

#elif XD3_WIN32
  DWORD nread2;
  if (ReadFile (ifile->file, buf, size, &nread2, NULL) == 0) {
          ret = get_errno();
  } else {
      *nread = (usize_t)nread2;
  }
#endif

  if (ret)
    {
      XPR(NT "%s: %s: %s\n", msg, ifile->filename, xd3_mainerror (ret));
    }
  else
    {
      if (option_verbose > 3) { XPR(NT "main read: %s: %u\n", ifile->filename, (*nread)); }
      ifile->nread += (*nread);
    }

  return ret;
}

static int
main_file_write (main_file *ofile, uint8_t *buf, usize_t size, const char *msg)
{
  int ret = 0;

#if XD3_STDIO
  usize_t result;

  result = fwrite (buf, 1, size, ofile->file);

  if (result != size) { ret = get_errno (); }

#elif XD3_POSIX
  ret = xd3_posix_io (ofile->file, buf, size, (xd3_posix_func*) &write, NULL);

#elif XD3_WIN32
  DWORD nwrite;
  if (WriteFile(ofile->file, buf, size, &nwrite, NULL) == 0) {
          ret = get_errno ();
  } else {
          if (size != nwrite) {
                  XPR(NT "Incorrect write count");
                  ret = XD3_INTERNAL;
          }
  }
#endif

  if (ret)
    {
      XPR(NT "%s: %s: %s\n", msg, ofile->filename, xd3_mainerror (ret));
    }
  else
    {
      if (option_verbose > 3) { XPR(NT "main write: %s: %u\n", ofile->filename, size); }
      ofile->nwrite += size;
    }

  return ret;
}

static int
main_file_seek (main_file *xfile, xoff_t pos)
{
  int ret = 0;

#if XD3_STDIO
  if (fseek (xfile->file, pos, SEEK_SET) != 0) { ret = get_errno (); }

#elif XD3_POSIX
  if (lseek (xfile->file, pos, SEEK_SET) != pos) { ret = get_errno (); }

#elif XD3_WIN32
  LARGE_INTEGER move, out;
  move.QuadPart = pos;
  if (SetFilePointerEx(xfile->file, move, &out, FILE_BEGIN) == 0) {
          ret = get_errno ();
  }
#endif

  if (ret)
    {
      XPR(NT "seek failed: %s: %s\n", xfile->filename, xd3_mainerror (ret));
    }

  return ret;
}

/******************************************************************************************
 VCDIFF TOOLS
 ******************************************************************************************/

#if VCDIFF_TOOLS

/* The following macros let VCDIFF printing something printf-like with
 * main_file_write(), e.g.,:
 * 
 *   VC(UT "trying to be portable: %d\n", x)VE;
 */
#define SNPRINTF_BUFSIZE 1024
#define VC do { if (((ret = snprintf
#define UT (char*)xfile->snprintf_buf, SNPRINTF_BUFSIZE,
#define VE ) >= SNPRINTF_BUFSIZE                               \
  && (ret = main_print_overflow(ret)) != 0)                    \
  || (ret = main_file_write(xfile, xfile->snprintf_buf,        \
                            ret, "print")) != 0)               \
  { return ret; } } while (0)

#ifdef WIN32
/* According to the internet, Windows vsnprintf() differs from most Unix
 * implementations regarding the terminating 0 when the boundary condition
 * is met. It doesn't matter here, we don't rely on the trailing 0. */
#include <stdarg.h>
int
snprintf (char *str, int n, char *fmt, ...)
{
  va_list a;
  int ret;
  va_start (a, fmt);
  ret = vsnprintf (str, n, fmt, a);
  va_end (a);
  return ret;
}
#endif

static int
main_print_overflow (int x)
{
  XPR(NT "internal print buffer overflow: %d bytes\n", x);
  return XD3_INTERNAL;
}

/* This function prints a single VCDIFF window. */
static int
main_print_window (xd3_stream* stream, main_file *xfile)
{
  int ret;
  usize_t size = 0;

  VC(UT "  Offset Code Type1 Size1 @Addr1 + Type2 Size2 @Addr2\n")VE;

  while (stream->inst_sect.buf < stream->inst_sect.buf_max)
    {
      uint   code = stream->inst_sect.buf[0];

      if ((ret = xd3_decode_instruction (stream))) { return ret; }

      VC(UT "  %06"Q"u %03u  %s %3u", stream->dec_winstart + size, code,
         xd3_rtype_to_string (stream->dec_current1.type, option_print_cpymode),
         (usize_t) stream->dec_current1.size)VE;

      if (stream->dec_current1.type != XD3_NOOP)
        {
          size += stream->dec_current1.size;
          if (stream->dec_current1.type >= XD3_CPY)
            {
              VC(UT " @%-6u", (usize_t)stream->dec_current1.addr)VE;
            }
          else
            {
              VC(UT "        ")VE;
            }
        }

      if (stream->dec_current2.type != XD3_NOOP)
        {
          size += stream->dec_current2.size;
          VC(UT "  %s %3u",
             xd3_rtype_to_string (stream->dec_current2.type, option_print_cpymode),
             (usize_t)stream->dec_current2.size)VE;

          if (stream->dec_current2.type >= XD3_CPY)
            {
              VC(UT " @%-6u", (usize_t)stream->dec_current2.addr)VE;
            }
        }

      VC(UT "\n")VE;
    }

  if (stream->dec_tgtlen != size && (stream->flags & XD3_SKIP_WINDOW) == 0)
    {
      XPR(NT "target window size inconsistency");
      return XD3_INTERNAL;
    }

  if (stream->dec_position != stream->dec_maxpos)
    {
      XPR(NT "target window position inconsistency");
      return XD3_INTERNAL;
    }

  if (stream->addr_sect.buf != stream->addr_sect.buf_max)
    {
      XPR(NT "address section inconsistency");
      return XD3_INTERNAL;
    }

  return 0;
}

static int
main_print_vcdiff_file (main_file *xfile, main_file *file, const char *type)
{
  int ret;  /* Used by above macros */
  if (file->filename)
    {
      VC(UT "XDELTA filename (%s):     %s\n", type, file->filename)VE;
    }
  if (file->compressor)
    {
      VC(UT "XDELTA ext comp (%s):     %s\n", type, file->compressor->recomp_cmdname)VE;
    }
  return 0;
}

/* This function prints a VCDIFF input, mainly for debugging purposes. */
static int
main_print_func (xd3_stream* stream, main_file *xfile)
{
  int ret;

  if (xfile->snprintf_buf == NULL)
    {
      if ((xfile->snprintf_buf = main_malloc(SNPRINTF_BUFSIZE)) == NULL)
        {
          return ENOMEM;
        }
    }

  if (stream->dec_winstart == 0)
    {
      VC(UT "VCDIFF version:               0\n")VE;

      VC(UT "VCDIFF header size:           %d\n", stream->dec_hdrsize)VE;
      VC(UT "VCDIFF header indicator:      ")VE;
      if ((stream->dec_hdr_ind & VCD_SECONDARY) != 0) VC(UT "VCD_SECONDARY ")VE;
      if ((stream->dec_hdr_ind & VCD_CODETABLE) != 0) VC(UT "VCD_CODETABLE ")VE;
      if ((stream->dec_hdr_ind & VCD_APPHEADER) != 0) VC(UT "VCD_APPHEADER ")VE;
      if (stream->dec_hdr_ind == 0) VC(UT "none")VE;
      VC(UT "\n")VE;

      IF_SEC(VC(UT "VCDIFF secondary compressor:  %s\n",
                stream->sec_type ? stream->sec_type->name : "none")VE);
      IF_NSEC(VC(UT "VCDIFF secondary compressor: unsupported\n")VE);

      if (stream->dec_hdr_ind & VCD_APPHEADER)
        {
          uint8_t *apphead;
          usize_t appheadsz;
          ret = xd3_get_appheader (stream, & apphead, & appheadsz);

          if (ret == 0 && appheadsz > 0)
            {
              int sq = option_quiet;
              main_file i, o, s;
              XD3_ASSERT (apphead != NULL);
              VC(UT "VCDIFF application header:    ")VE;
              if ((ret = main_file_write (xfile, apphead, appheadsz, "print")) != 0) { return ret; }
              VC(UT "\n")VE;

              main_file_init (& i);
              main_file_init (& o);
              main_file_init (& s);
              option_quiet = 1;
              main_get_appheader (stream, &i, & o, & s);
              option_quiet = sq;
              if ((ret = main_print_vcdiff_file (xfile, & o, "output"))) { return ret; }
              if ((ret = main_print_vcdiff_file (xfile, & s, "source"))) { return ret; }
              main_file_cleanup (& i);
              main_file_cleanup (& o);
              main_file_cleanup (& s);
            }
        }
    }
  else
    {
      VC(UT "\n")VE;
    }

  VC(UT "VCDIFF window number:         %"Q"u\n", stream->current_window)VE;
  VC(UT "VCDIFF window indicator:      ")VE;
  if ((stream->dec_win_ind & VCD_SOURCE) != 0) VC(UT "VCD_SOURCE ")VE;
  if ((stream->dec_win_ind & VCD_TARGET) != 0) VC(UT "VCD_TARGET ")VE;
  if ((stream->dec_win_ind & VCD_ADLER32) != 0) VC(UT "VCD_ADLER32 ")VE;
  if (stream->dec_win_ind == 0) VC(UT "none")VE;
  VC(UT "\n")VE;

  if ((stream->dec_win_ind & VCD_ADLER32) != 0)
    {
      VC(UT "VCDIFF adler32 checksum:      %08X\n", (usize_t)stream->dec_adler32)VE;
    }

  if (stream->dec_del_ind != 0)
    {
      VC(UT "VCDIFF delta indicator:       ")VE;
      if ((stream->dec_del_ind & VCD_DATACOMP) != 0) VC(UT "VCD_DATACOMP ")VE;
      if ((stream->dec_del_ind & VCD_INSTCOMP) != 0) VC(UT "VCD_INSTCOMP ")VE;
      if ((stream->dec_del_ind & VCD_ADDRCOMP) != 0) VC(UT "VCD_ADDRCOMP ")VE;
      if (stream->dec_del_ind == 0) VC(UT "none")VE;
      VC(UT "\n")VE;
    }

  if (stream->dec_winstart != 0)
    {
      VC(UT "VCDIFF window at offset:      %"Q"u\n", stream->dec_winstart)VE;
    }

  if (SRCORTGT (stream->dec_win_ind))
    {
      VC(UT "VCDIFF copy window length:    %u\n", (usize_t)stream->dec_cpylen)VE;
      VC(UT "VCDIFF copy window offset:    %"Q"u\n", stream->dec_cpyoff)VE;
    }

  VC(UT "VCDIFF delta encoding length: %u\n", (usize_t)stream->dec_enclen)VE;
  VC(UT "VCDIFF target window length:  %u\n", (usize_t)stream->dec_tgtlen)VE;

  VC(UT "VCDIFF data section length:   %u\n", (usize_t)stream->data_sect.size)VE;
  VC(UT "VCDIFF inst section length:   %u\n", (usize_t)stream->inst_sect.size)VE;
  VC(UT "VCDIFF addr section length:   %u\n", (usize_t)stream->addr_sect.size)VE;

  ret = 0;
  if ((stream->flags & XD3_JUST_HDR) != 0)
    {
      /* Print a header -- finished! */
      ret = PRINTHDR_SPECIAL;
    }
  else if ((stream->flags & XD3_SKIP_WINDOW) == 0)
    {
      ret = main_print_window (stream, xfile);
    }

  return ret;
}
#endif /* VCDIFF_TOOLS */

/******************************************************************************************
 Input decompression, output recompression
 ******************************************************************************************/

#if EXTERNAL_COMPRESSION
/* This is tricky POSIX-specific code with lots of fork(), pipe(), dup(), waitpid(), and
 * exec() business.  Most of this code originated in PRCS1, which did automatic
 * package-file decompression.  It works with both XD3_POSIX and XD3_STDIO file
 * disciplines.
 *
 * To automatically detect compressed inputs requires a child process to reconstruct the
 * input stream, which was advanced in order to detect compression, because it may not be
 * seekable.  In other words, the main program reads part of the input stream, and if it
 * detects a compressed input it then forks a pipe copier process, which copies the
 * first-read block out of the main-program's memory, then streams the remaining
 * compressed input into the input-decompression pipe.
 */

#include <unistd.h>
#include <sys/stat.h>
#include <sys/wait.h>

/* Remember which pipe FD is which. */
#define PIPE_READ_FD  0
#define PIPE_WRITE_FD 1

static pid_t ext_subprocs[2];
static char* ext_tmpfile = NULL;

/* Like write(), but makes repeated calls to empty the buffer. */
static int
main_pipe_write (int outfd, const uint8_t *exist_buf, usize_t remain)
{
  int ret;

  if ((ret = xd3_posix_io (outfd, (uint8_t*) exist_buf, remain, (xd3_posix_func*) &write, NULL)))
    {
      XPR(NT "pipe write failed: %s", xd3_mainerror (ret));
      return ret;
    }

  return 0;
}

/* A simple error-reporting waitpid interface. */
static int
main_waitpid_check(pid_t pid)
{
  int status;
  int ret = 0;

  if (waitpid (pid, & status, 0) < 0)
    {
      ret = get_errno ();
      XPR(NT "compression subprocess: wait: %s\n", xd3_mainerror (ret));
    }
  else if (! WIFEXITED (status))
    {
      ret = ECHILD;
      XPR(NT "compression subprocess: signal %d\n",
         WIFSIGNALED (status) ? WTERMSIG (status) : WSTOPSIG (status));
    }
  else if (WEXITSTATUS (status) != 0)
    {
      ret = ECHILD;
      XPR(NT "compression subprocess: exit %d\n", WEXITSTATUS (status));
    }

  return ret;
}

/* Wait for any existing child processes to check for abnormal exit. */
static int
main_external_compression_finish (void)
{
  int i;
  int ret;

  for (i = 0; i < 2; i += 1)
    {
      if (! ext_subprocs[i]) { continue; }

      if ((ret = main_waitpid_check (ext_subprocs[i])))
        {
          return ret;
        }
    }

  return 0;
}

/* This runs as a forked process of main_input_decompress_setup() to copy input to the
 * decompression process.  First, the available input is copied out of the existing
 * buffer, then the buffer is reused to continue reading from the compressed input
 * file. */
static int
main_pipe_copier (uint8_t    *pipe_buf,
                  usize_t      pipe_bufsize,
                  usize_t      nread,
                  main_file   *ifile,
                  int         outfd)
{
  int ret;

  for (;;)
    {
      if (nread > 0 && (ret = main_pipe_write (outfd, pipe_buf, nread)))
        {
          return ret;
        }

      if (nread < pipe_bufsize)
        {
          break;
        }

      if ((ret = main_file_read (ifile, pipe_buf, pipe_bufsize, & nread, "pipe read failed")) < 0)
        {
          return ret;
        }
    }

  return 0;
}

/* This function is called after we have read some amount of data from the input file and
 * detected a compressed input.  Here we start a decompression subprocess by forking
 * twice.  The first process runs the decompression command, the second process copies
 * data to the input of the first. */
static int
main_input_decompress_setup (const main_extcomp     *decomp,
                             main_file              *ifile,
                             uint8_t               *input_buf,
                             usize_t                 input_bufsize,
                             uint8_t               *pipe_buf,
                             usize_t                 pipe_bufsize,
                             usize_t                 pipe_avail,
                             usize_t                *nread)
{
  int outpipefd[2], inpipefd[2];  /* The two pipes: input and output file descriptors. */
  int input_fd = -1;              /* The resulting input_fd (output of decompression). */
  pid_t decomp_id, copier_id;     /* The two subprocs. */
  int ret;

  outpipefd[0] = outpipefd[1] = -1;
  inpipefd[0]  = inpipefd[1]  = -1;

  if (pipe (outpipefd) || pipe (inpipefd))
    {
      XPR(NT "pipe failed: %s\n", xd3_mainerror (ret = get_errno ()));
      goto pipe_cleanup;
    }

  if ((decomp_id = fork ()) < 0)
    {
      XPR(NT "fork failed: %s\n", xd3_mainerror (ret = get_errno ()));
      goto pipe_cleanup;
    }

  /* The first child runs the decompression process: */
  if (decomp_id == 0)
    {
      /* Setup pipes: write to the outpipe, read from the inpipe. */
      if (dup2 (outpipefd[PIPE_WRITE_FD], STDOUT_FILENO) < 0 ||
          dup2 (inpipefd[PIPE_READ_FD], STDIN_FILENO) < 0 ||
          close (outpipefd[PIPE_READ_FD]) ||
          close (outpipefd[PIPE_WRITE_FD]) ||
          close (inpipefd[PIPE_READ_FD]) ||
          close (inpipefd[PIPE_WRITE_FD]) ||
          execlp (decomp->decomp_cmdname, decomp->decomp_cmdname, decomp->decomp_options, NULL))
        {
          XPR(NT "child process %s failed to execute: %s\n", decomp->decomp_cmdname, xd3_mainerror (get_errno ()));
        }

      _exit (127);
    }

  ext_subprocs[0] = decomp_id;

  if ((copier_id = fork ()) < 0)
    {
      XPR(NT "fork failed: %s\n", xd3_mainerror (ret = get_errno ()));
      goto pipe_cleanup;
    }

  /* The second child runs the copier process: */
  if (copier_id == 0)
    {
      int exitval = 0;

      if (close (inpipefd[PIPE_READ_FD]) ||
          main_pipe_copier (pipe_buf, pipe_bufsize, pipe_avail, ifile, inpipefd[PIPE_WRITE_FD]) ||
          close (inpipefd[PIPE_WRITE_FD]))
        {
          XPR(NT "child copier process failed: %s\n", xd3_mainerror (get_errno ()));
          exitval = 1;
        }

      _exit (exitval);
    }

  ext_subprocs[1] = copier_id;

  /* The parent closes both pipes after duplicating the output of compression. */
  input_fd = dup (outpipefd[PIPE_READ_FD]);

  if (input_fd < 0 ||
      main_file_close (ifile) ||
      close (outpipefd[PIPE_READ_FD]) ||
      close (outpipefd[PIPE_WRITE_FD]) ||
      close (inpipefd[PIPE_READ_FD]) ||
      close (inpipefd[PIPE_WRITE_FD]))
    {
      XPR(NT "dup/close failed: %s\n", xd3_mainerror (ret = get_errno ()));
      goto pipe_cleanup;
    }

#if XD3_STDIO
  /* Note: fdopen() acquires the fd, closes it when finished. */
  if ((ifile->file = fdopen (input_fd, "r")) == NULL)
    {
      XPR(NT "fdopen failed: %s\n", xd3_mainerror (ret = get_errno ()));
      goto pipe_cleanup;
    }

#elif XD3_POSIX
  ifile->file = input_fd;
#endif

  ifile->compressor = decomp;

  /* Now the input file is decompressed. */
  return main_file_read (ifile, input_buf, input_bufsize, nread, "input decompression failed");

 pipe_cleanup:
  close (input_fd);
  close (outpipefd[PIPE_READ_FD]);
  close (outpipefd[PIPE_WRITE_FD]);
  close (inpipefd[PIPE_READ_FD]);
  close (inpipefd[PIPE_WRITE_FD]);
  return ret;
}


/* This routine is called when the first buffer of input data is read by the main program
 * (unless input decompression is disabled by command-line option).  If it recognizes the
 * magic number of a known input type it invokes decompression.
 *
 * Skips decompression if the decompression type or the file type is RD_NONEXTERNAL.
 *
 * Behaves exactly like main_file_read, otherwise.
 *
 * This function uses a separate buffer to read the first small block of input.  If a
 * compressed input is detected, the separate buffer is passed to the pipe copier.  This
 * avoids using the same size buffer in both cases. */
static int
main_decompress_input_check (main_file   *ifile,
                            uint8_t    *input_buf,
                            usize_t      input_size,
                            usize_t     *nread)
{
  int i;
  int ret;
  uint8_t check_buf[XD3_ALLOCSIZE];
  usize_t  check_nread;

  if ((ret = main_file_read (ifile, check_buf, min (input_size, XD3_ALLOCSIZE), & check_nread, "input read failed")))
    {
      return ret;
    }

  for (i = 0; i < SIZEOF_ARRAY (extcomp_types); i += 1)
    {
      const main_extcomp *decomp = & extcomp_types[i];

      if ((check_nread > decomp->magic_size) &&
          /* The following expr skips decompression if we are trying to read a VCDIFF
           * input and that is the magic number. */
          !((decomp->flags & RD_NONEXTERNAL) && (ifile->flags & RD_NONEXTERNAL)) &&
          memcmp (check_buf, decomp->magic, decomp->magic_size) == 0)
        {
          if (! option_quiet)
            {
              XPR(NT "%s | %s %s\n",
                 ifile->filename,
                 decomp->decomp_cmdname,
                 decomp->decomp_options);
            }

          return main_input_decompress_setup (decomp, ifile,
                                              input_buf, input_size,
                                              check_buf, XD3_ALLOCSIZE,
                                              check_nread, nread);
        }
    }

  /* Now read the rest of the input block. */
  (*nread) = 0;

  if (check_nread == XD3_ALLOCSIZE)
    {
      ret = main_file_read (ifile, input_buf + XD3_ALLOCSIZE,
                            input_size - XD3_ALLOCSIZE, nread,
                            "input read failed");
    }

  memcpy (input_buf, check_buf, check_nread);

  (*nread) += check_nread;

  return 0;
}

/* This is called when the source file needs to be decompressed.  We fork/exec a
 * decompression command with the proper input and output to a temporary file. */
static int
main_decompress_source (main_file *sfile, xd3_source *source)
{
  const main_extcomp *decomp = sfile->compressor;
  pid_t decomp_id;  /* One subproc. */
  int   input_fd  = -1;
  int   output_fd = -1;
  int   ret;
  char *tmpname = NULL;
  char *tmpdir  = getenv ("TMPDIR");
  static const char tmpl[] = "/xd3src.XXXXXX";

  /* Make a template for mkstmp() */
  if (tmpdir == NULL) { tmpdir = "/tmp"; }
  if ((tmpname = main_malloc (strlen (tmpdir) + sizeof (tmpl) + 1)) == NULL) { return ENOMEM; }
  sprintf (tmpname, "%s%s", tmpdir, tmpl);

  XD3_ASSERT (ext_tmpfile == NULL);
  ext_tmpfile = tmpname;

  /* Open the output FD. */
  if ((output_fd = mkstemp (tmpname)) < 0)
    {
      XPR(NT "mkstemp failed: %s: %s", tmpname, xd3_mainerror (ret = get_errno ()));
      goto cleanup;
    }

  /* Copy the input FD, reset file position. */
  XD3_ASSERT (main_file_isopen (sfile));
#if XD3_STDIO
  if ((input_fd = dup (fileno (sfile->file))) < 0)
    {
      XPR(NT "dup failed: %s", xd3_mainerror (ret = get_errno ()));
      goto cleanup;
    }
  main_file_close (sfile);
  sfile->file = NULL;
#elif XD3_POSIX
  input_fd = sfile->file;
  sfile->file = -1;
#endif

  if ((ret = lseek (input_fd, SEEK_SET, 0)) != 0)
    {
      XPR(NT "lseek failed: : %s", xd3_mainerror (ret = get_errno ()));
      goto cleanup;
    }

  if ((decomp_id = fork ()) < 0)
    {
      XPR(NT "fork failed: %s", xd3_mainerror (ret = get_errno ()));
      goto cleanup;
    }

  /* The child runs the decompression process: */
  if (decomp_id == 0)
    {
      /* Setup pipes: write to the output file, read from the pipe. */
      if (dup2 (input_fd, STDIN_FILENO) < 0 ||
          dup2 (output_fd, STDOUT_FILENO) < 0 ||
          execlp (decomp->decomp_cmdname, decomp->decomp_cmdname, decomp->decomp_options, NULL))
        {
          XPR(NT "child process %s failed to execute: %s\n",
                   decomp->decomp_cmdname, xd3_mainerror (get_errno ()));
        }

      _exit (127);
    }

  close (input_fd);
  close (output_fd);
  input_fd  = -1;
  output_fd = -1;

  /* Then wait for completion. */
  if ((ret = main_waitpid_check (decomp_id)))
    {
      goto cleanup;
    }

  /* Open/stat the decompressed source file. */
  if ((ret = main_file_open (sfile, tmpname, XO_READ))) { goto cleanup; }
  if ((ret = main_file_stat (sfile, & source->size, 1))) { goto cleanup; }
  return 0;

 cleanup:
  close (input_fd);
  close (output_fd);
  if (tmpname) { free (tmpname); }
  ext_tmpfile = NULL;
  return ret;
}

/* Initiate re-compression of the output stream.  This is easier than input decompression
 * because we know beforehand that the stream will be compressed, whereas the input has
 * already been read when we decide it should be decompressed.  Thus, it only requires one
 * subprocess and one pipe. */
static int
main_recompress_output (main_file *ofile)
{
  pid_t recomp_id;  /* One subproc. */
  int   pipefd[2];  /* One pipe. */
  int   output_fd = -1;
  int   ret;
  const main_extcomp *recomp = ofile->compressor;

  pipefd[0] = pipefd[1] = -1;

  if (pipe (pipefd))
    {
      XPR(NT "pipe failed: %s\n", xd3_mainerror (ret = get_errno ()));
      goto pipe_cleanup;
    }

  if ((recomp_id = fork ()) < 0)
    {
      XPR(NT "fork failed: %s\n", xd3_mainerror (ret = get_errno ()));
      goto pipe_cleanup;
    }

  /* The child runs the recompression process: */
  if (recomp_id == 0)
    {
      /* Setup pipes: write to the output file, read from the pipe. */
      if (dup2 (XFNO (ofile), STDOUT_FILENO) < 0 ||
          dup2 (pipefd[PIPE_READ_FD], STDIN_FILENO) < 0 ||
          close (pipefd[PIPE_READ_FD]) ||
          close (pipefd[PIPE_WRITE_FD]) ||
          execlp (recomp->recomp_cmdname, recomp->recomp_cmdname, recomp->recomp_options, NULL))
        {
          XPR(NT "child process %s failed to execute: %s\n", recomp->recomp_cmdname, xd3_mainerror (get_errno ()));
        }

      _exit (127);
    }

  ext_subprocs[0] = recomp_id;

  /* The parent closes both pipes after duplicating the output-fd for writing to the
   * compression pipe. */
  output_fd = dup (pipefd[PIPE_WRITE_FD]);

  if (output_fd < 0 ||
      main_file_close (ofile) ||
      close (pipefd[PIPE_READ_FD]) ||
      close (pipefd[PIPE_WRITE_FD]))
    {
      XPR(NT "close failed: %s\n", xd3_mainerror (ret = get_errno ()));
      goto pipe_cleanup;
    }

#if XD3_STDIO
  /* Note: fdopen() acquires the fd, closes it when finished. */
  if ((ofile->file = fdopen (output_fd, "w")) == NULL)
    {
      XPR(NT "fdopen failed: %s\n", xd3_mainerror (ret = get_errno ()));
      goto pipe_cleanup;
    }

#elif XD3_POSIX
  ofile->file = output_fd;
#endif

  /* Now the output file will be compressed. */
  return 0;

 pipe_cleanup:
  close (output_fd);
  close (pipefd[PIPE_READ_FD]);
  close (pipefd[PIPE_WRITE_FD]);
  return ret;
}
#endif /* EXTERNAL_COMPRESSION */

/* Identify the compressor that was used based on its ident string, which is passed in the
 * application header. */
static const main_extcomp*
main_ident_compressor (const char *ident)
{
  int i;

  for (i = 0; i < SIZEOF_ARRAY (extcomp_types); i += 1)
    {
      if (strcmp (extcomp_types[i].ident, ident) == 0)
        {
          return & extcomp_types[i];
        }
    }

  return NULL;
}

/* Return the main_extcomp record to use for this identifier, if possible. */
static const main_extcomp*
main_get_compressor (const char *ident)
{
  const main_extcomp *ext = main_ident_compressor (ident);

  if (ext == NULL)
    {
      if (! option_quiet)
        {
          XPR(NT "warning: cannot recompress output: "
                   "unrecognized external compression ID: %s\n", ident);
        }
      return NULL;
    }
  else if (! EXTERNAL_COMPRESSION)
    {
      if (! option_quiet)
        {
          XPR(NT "warning: external support not compiled: "
                   "original input was compressed: %s\n", ext->recomp_cmdname);
        }
      return NULL;
    }
  else
    {
      return ext;
    }
}

/******************************************************************************************
 APPLICATION HEADER
 ******************************************************************************************/

#if XD3_ENCODER
static const char*
main_apphead_string (const char* x)
{
  const char *y;

  if (x == NULL) { return ""; }

  if (strcmp (x, "/dev/stdin") == 0 ||
      strcmp (x, "/dev/stdout") == 0 ||
      strcmp (x, "/dev/stderr") == 0) { return "-"; }

  // TODO: this is not portable
  return (y = strrchr (x, '/')) == NULL ? x : y + 1;
}

static int
main_set_appheader (xd3_stream *stream, main_file *input, main_file *sfile)
{
  /* The user may disable the application header.  Once the appheader is set, this
   * disables setting it again. */
  if (appheader_used || ! option_use_appheader) { return 0; }

  /* The user may specify the application header, otherwise format the default header. */
  if (option_appheader)
    {
      appheader_used = option_appheader;
    }
  else
    {
      const char *iname;
      const char *icomp;
      const char *sname;
      const char *scomp;
      int len;

      iname = main_apphead_string (input->filename);
      icomp = (input->compressor == NULL) ? "" : input->compressor->ident;
      len = strlen (iname) + strlen (icomp) + 2;

      if (sfile->filename != NULL)
        {
          sname = main_apphead_string (sfile->filename);
          scomp = (sfile->compressor == NULL) ? "" : sfile->compressor->ident;
          len += strlen (sname) + strlen (scomp) + 2;
        }
      else
        {
          sname = scomp = "";
        }

      if ((appheader_used = main_malloc (len)) == NULL)
        {
          return ENOMEM;
        }

      if (sfile->filename == NULL)
        {
          sprintf ((char*)appheader_used, "%s/%s", iname, icomp);
        }
      else
        {
          sprintf ((char*)appheader_used, "%s/%s/%s/%s", iname, icomp, sname, scomp);
        }
    }

  xd3_set_appheader (stream, appheader_used, strlen ((char*)appheader_used));

  return 0;
}
#endif

static void
main_get_appheader_params (main_file *file, char **parsed, int output, const char *type,
                           main_file *other)
{
  /* Set the filename if it was not specified.  If output, option_stdout (-c) overrides. */
  if (file->filename == NULL && ! (output && option_stdout) && strcmp (parsed[0], "-") != 0)
    {
      file->filename = parsed[0];

      if (other->filename != NULL) {
        /* Take directory from the other file, if it has one. */
        /* TODO: This results in nonsense names like /dev/foo.tar.gz
         * and probably the filename-default logic interferes with
         * multi-file operation and the standard file extension?
         * Possibly the name header is bad, should be off by default.
         * Possibly we just want to remember external/compression
         * settings. */
        char *last_slash = strrchr(other->filename, '/');

        if (last_slash != NULL) {
          int dlen = last_slash - other->filename;

          XD3_ASSERT(file->filename_copy == NULL);
          file->filename_copy = main_malloc(dlen + 2 + strlen(file->filename));

          strncpy(file->filename_copy, other->filename, dlen);
          file->filename_copy[dlen] = '/';
          strcpy(file->filename_copy + dlen + 1, parsed[0]);

          file->filename = file->filename_copy;
        }
      }

      if (! option_quiet)
        {
          XPR(NT "using default %s filename: %s\n", type, file->filename);
        }
    }

  /* Set the compressor, initiate de/recompression later. */
  if (file->compressor == NULL && *parsed[1] != 0)
    {
      file->compressor = main_get_compressor (parsed[1]);
    }
}

static void
main_get_appheader (xd3_stream *stream, main_file *ifile, main_file *output, main_file *sfile)
{
  uint8_t *apphead;
  usize_t appheadsz;
  int ret;

  /* The user may disable the application header.  Once the appheader is set, this
   * disables setting it again. */
  if (! option_use_appheader) { return; }

  ret = xd3_get_appheader (stream, & apphead, & appheadsz);

  /* Ignore failure, it only means we haven't received a header yet. */
  if (ret != 0) { return; }

  if (appheadsz > 0)
    {
      char *start = (char*)apphead;
      char *slash;
      int   place = 0;
      char *parsed[4];

      memset (parsed, 0, sizeof (parsed));

      while ((slash = strchr (start, '/')) != NULL)
        {
          *slash = 0;
          parsed[place++] = start;
          start = slash + 1;
        }

      parsed[place++] = start;

      /* First take the output parameters. */
      if (place == 2 || place == 4)
        {
          main_get_appheader_params (output, parsed, 1, "output", ifile);
        }

      /* Then take the source parameters. */
      if (place == 4)
        {
          main_get_appheader_params (sfile, parsed+2, 0, "source", ifile);
        }
    }

  option_use_appheader = 0;
  return;
}

/******************************************************************************************
 Main I/O routines
 ******************************************************************************************/

/* This function acts like the above except it may also try to recognize a compressed
 * input when the first buffer of data is read.  The EXTERNAL_COMPRESSION code is called
 * to search for magic numbers. */
static int
main_read_primary_input (main_file   *ifile,
                         uint8_t    *buf,
                         usize_t      size,
                         usize_t     *nread)
{
#if EXTERNAL_COMPRESSION
  if (option_decompress_inputs && ifile->flags & RD_FIRST)
    {
      ifile->flags &= ~RD_FIRST;

      return main_decompress_input_check (ifile, buf, size, nread);
    }
#endif

  return main_file_read (ifile, buf, size, nread, "input read failed");
}

/* This function simply writes the stream output buffer, if there is any.  This is used
 * for both encode and decode commands.  (The VCDIFF tools use main_print_func()). */
static int
main_write_output (xd3_stream* stream, main_file *ofile)
{
  int ret;

  if (stream->avail_out > 0 && (ret = main_file_write (ofile, stream->next_out, stream->avail_out, "write failed")))
    {
      return ret;
    }

  return 0;
}

/* Open the main output file, sets a default file name, initiate recompression.  This
 * function is expected to fprint any error messages. */
static int
main_open_output (xd3_stream *stream, main_file *ofile)
{
  int ret;

  if (ofile->filename == NULL)
    {
      XSTDOUT_XF (ofile);

      if (option_verbose > 1) { XPR(NT "using standard output: %s\n", ofile->filename); }
    }
  else
    {
      /* Stat the file to check for overwrite. */
      if (option_force == 0 && main_file_exists (ofile))
        {
          XPR(NT "to overwrite output file specify -f: %s\n", ofile->filename);
          return EEXIST;
        }

      if ((ret = main_file_open (ofile, ofile->filename, XO_WRITE)))
        {
          return ret;
        }

      if (option_verbose > 1) { XPR(NT "output file: %s\n", ofile->filename); }
    }

#if EXTERNAL_COMPRESSION
  /* Do output recompression. */
  if (ofile->compressor != NULL && option_recompress_outputs == 1)
    {
      if (! option_quiet)
        {
          XPR(NT "%s %s | %s\n",
             ofile->compressor->recomp_cmdname,
             ofile->compressor->recomp_options,
             ofile->filename);
        }

      if ((ret = main_recompress_output (ofile)))
        {
          return ret;
        }
    }
#endif

  return 0;
}

/* This is called at different times for encoding and decoding.  The encoder calls it
 * immediately, the decoder delays until the application header is received.
 * Stream may be NULL, in which case xd3_set_source is not called. */
static int
main_set_source (xd3_stream *stream, int cmd, main_file *sfile, xd3_source *source)
{
  int ret = 0, i;
  uint8_t *tmp_buf = NULL;

  /* Open it, check for seekability, set required xd3_source fields. */
  if (allow_fake_source)
    {
      sfile->mode = XO_READ;
      sfile->realname = sfile->filename;
      sfile->nread = 0;
      source->size = UINT64_MAX;
    }
  else
    {
      if ((ret = main_file_open (sfile, sfile->filename, XO_READ)) ||
          (ret = main_file_stat (sfile, & source->size, 1)))
        {
          goto error;
        }
    }

  source->name     = sfile->filename;
  source->ioh      = sfile;
  source->curblkno = (xoff_t) -1;
  source->curblk   = NULL;
  
#if EXTERNAL_COMPRESSION
  if (option_decompress_inputs)
    {
      /* If encoding, read the header to check for decompression. */
      if (IS_ENCODE (cmd))
        {
          usize_t nread;
          tmp_buf = main_malloc(XD3_ALLOCSIZE);

          if ((ret = main_file_read (sfile, tmp_buf, XD3_ALLOCSIZE,
                                     & nread, "source read failed")))
            {
              goto error;
            }

          /* Check known magic numbers. */
          for (i = 0; i < SIZEOF_ARRAY (extcomp_types); i += 1)
            {
              const main_extcomp *decomp = & extcomp_types[i];

              if ((nread > decomp->magic_size) &&
                  memcmp (tmp_buf, decomp->magic, decomp->magic_size) == 0)
                {
                  sfile->compressor = decomp;
                  break;
                }
            }

          if (sfile->compressor == NULL)
            {
              if (option_verbose > 2)
                {
                  XPR(NT "source block 0 read (not compressed)\n");
                }
            }
        }

      /* In either the encoder or decoder, start decompression. */
      if (sfile->compressor)
        {
          xoff_t osize = source->size;

          if (osize > XD3_NODECOMPRESSSIZE)
            {
              XPR(NT "source file too large for external decompression: %s: %"Q"u\n",
                       sfile->filename, osize);
              ret = XD3_INTERNAL;
              goto error;
            }

          if ((ret = main_decompress_source (sfile, source)))
            {
              goto error;
            }

          if (! option_quiet)
            {
              char s1[32], s2[32];
              XPR(NT "%s | %s %s => %s %.1f%% [ %s , %s ]\n",
                 sfile->filename,
                 sfile->compressor->decomp_cmdname,
                 sfile->compressor->decomp_options,
                 sfile->realname,
                 100.0 * source->size / osize,
                 main_format_bcnt (osize, s1),
                 main_format_bcnt (source->size, s2));
            }
        }
    }
#endif

  /* At this point we know source->size.
   * Source buffer, blksize, LRU init. */
  if (source->size < option_srcwinsz)
    {
      /* Reduce sizes to actual source size, read whole file */
      option_srcwinsz = source->size;
      source->blksize = source->size;
      lru_size = 1;
    }
  else
    {
      option_srcwinsz = max(option_srcwinsz, XD3_MINSRCWINSZ);

      source->blksize = (option_srcwinsz / LRU_SIZE);
      lru_size = LRU_SIZE;
    }

  main_blklru_list_init (& lru_list);
  main_blklru_list_init (& lru_free);

  if (option_verbose)
    {
      static char buf[32];
      
      XPR(NT "source %s winsize %s size %"Q"u\n",
          sfile->filename, main_format_bcnt(option_srcwinsz, buf), source->size);
    }

  if (option_verbose > 1)
    {
      XPR(NT "source block size: %u\n", source->blksize);
    }

  if ((lru = main_malloc (sizeof (main_blklru) * lru_size)) == NULL)
    {
      ret = ENOMEM;
      goto error;
    }

  for (i = 0; i < lru_size; i += 1)
    {
      lru[i].blkno = (xoff_t) -1;

      if ((lru[i].blk = main_malloc (source->blksize)) == NULL)
        {
          ret = ENOMEM;
          goto error;
        }

      main_blklru_list_push_back (& lru_free, & lru[i]);
    }

  if (stream && (ret = xd3_set_source (stream, source)))
    {
      XPR(NT XD3_LIB_ERRMSG (stream, ret));
      goto error;
    }

 error:
  if (tmp_buf != NULL)
    {
      main_free (tmp_buf);
    }

  return ret;
}

static void
main_set_winsize (main_file *ifile) {
  xoff_t file_size;

  if (main_file_stat (ifile, &file_size, 0) == 0)
    {
      option_winsize = (usize_t) min(file_size, (xoff_t) option_winsize);
    }

  option_winsize = max(option_winsize, XD3_ALLOCSIZE);

  if (option_verbose > 1)
    {
      XPR(NT "input window size: %u\n", option_winsize);
    }
}

/******************************************************************************************
 Source routines
 ******************************************************************************************/

/* This is the callback for reading a block of source.  This function is blocking and it
 * implements a small LRU.
 *
 * Note that it is possible for main_input() to handle getblk requests in a non-blocking
 * manner.  If the callback is NULL then the caller of xd3_*_input() must handle the
 * XD3_GETSRCBLK return value and fill the source in the same way.  See xd3_getblk for
 * details.  To see an example of non-blocking getblk, see xdelta-test.h. */
static int
main_getblk_func (xd3_stream *stream,
                  xd3_source *source,
                  xoff_t      blkno)
{
  xoff_t      pos   = blkno * source->blksize;
  main_file   *sfile = (main_file*) source->ioh;
  main_blklru *blru  = NULL;
  usize_t      onblk = xd3_bytes_on_srcblk (source, blkno);
  usize_t      nread;
  int         ret;
  int         i;

  if (allow_fake_source)
    {
      source->curblkno = blkno;
      source->onblk    = onblk;
      source->curblk   = lru[0].blk;
      return 0;
    }

  if (do_not_lru)
    {
      /* Direct lookup assumes sequential scan w/o skipping blocks. */
      int idx = blkno % lru_size;
      if (lru[idx].blkno == blkno)
        {
          source->curblkno = blkno;
          source->onblk    = onblk;
          source->curblk   = lru[idx].blk;
          lru_hits += 1;
          return 0;
        }

      if (lru[idx].blkno != -1LL &&
          lru[idx].blkno != blkno - lru_size)
        {
          return XD3_TOOFARBACK;
        }
    }
  else
    {
      /* Sequential search through LRU. */
      for (i = 0; i < lru_size; i += 1)
        {
          if (lru[i].blkno == blkno)
            {
              main_blklru_list_remove (& lru[i]);
              main_blklru_list_push_back (& lru_list, & lru[i]);

              source->curblkno = blkno;
              source->onblk    = onblk;
              source->curblk   = lru[i].blk;
              lru_hits += 1;
              return 0;
            }
        }
    }

  if (! main_blklru_list_empty (& lru_free))
    {
      blru = main_blklru_list_pop_front (& lru_free);
    }
  else if (! main_blklru_list_empty (& lru_list))
    {
      if (do_not_lru) {
        blru = & lru[blkno % lru_size];
        main_blklru_list_remove(blru);
      } else {
        blru = main_blklru_list_pop_front (& lru_list);
      }
      lru_misses += 1;
    }

  lru_filled += 1;

  if ((ret = main_file_seek (sfile, pos)))
    {
      return ret;
    }

  if ((ret = main_file_read (sfile, (uint8_t*) blru->blk, source->blksize,
                             & nread, "source read failed")))
    {
      return ret;
    }

  if (nread != onblk)
    {
      XPR(NT "source file size change: %s\n", sfile->filename);
      return XD3_INTERNAL;
    }

  main_blklru_list_push_back (& lru_list, blru);

  if (option_verbose > 3)
    {
      if (blru->blkno != -1LL)
        {
          XPR(NT "source block %"Q"u ejects %"Q"u (lru_hits=%u, lru_misses=%u, lru_filled=%u)\n",
              blkno, blru->blkno, lru_hits, lru_misses, lru_filled);
        }
      else
        {
          XPR(NT "source block %"Q"u read (lru_hits=%u, lru_misses=%u, lru_filled=%u)\n",
                                          blkno, lru_hits, lru_misses, lru_filled);
        }
    }

  blru->blkno      = blkno;
  source->curblk   = blru->blk;
  source->curblkno = blkno;
  source->onblk    = onblk;

  return 0;
}

/******************************************************************************************
 Main routines
 ******************************************************************************************/

/* This is a generic input function.  It calls the xd3_encode_input or xd3_decode_input
 * functions and makes calls to the various input handling routines above, which
 * coordinate external decompression.
 */
static int
main_input (xd3_cmd     cmd,
            main_file   *ifile,
            main_file   *ofile,
            main_file   *sfile)
{
  int        ret;
  xd3_stream stream;
  usize_t    nread;
  int        stream_flags = 0;
  xd3_config config;
  xd3_source source;
  xoff_t     last_total_in = 0;
  xoff_t     last_total_out = 0;
  long       start_time;
  int        stdout_only = 0;

  int (*input_func) (xd3_stream*);
  int (*output_func) (xd3_stream*, main_file *);

  memset (& source, 0, sizeof (source));
  memset (& config, 0, sizeof (config));

  config.alloc = main_alloc;
  config.freef = main_free1;
  config.sec_data.ngroups = 1;
  config.sec_addr.ngroups = 1;
  config.sec_inst.ngroups = 1;
  config.iopt_size = option_iopt_size;
  config.sprevsz = option_sprevsz;

  do_not_lru = 0;

  start_time = get_millisecs_now ();

  /* main_input setup. */
  switch ((int) cmd)
    {
#if VCDIFF_TOOLS
           if (1) { case CMD_PRINTHDR:   stream_flags = XD3_JUST_HDR; }
      else if (1) { case CMD_PRINTHDRS:  stream_flags = XD3_SKIP_WINDOW; }
      else        { case CMD_PRINTDELTA: stream_flags = XD3_SKIP_EMIT; }
      ifile->flags |= RD_NONEXTERNAL;
      input_func    = xd3_decode_input;
      output_func   = main_print_func;
      stream_flags |= XD3_ADLER32_NOVER;
      stdout_only   = 1;
      break;
#endif
#if XD3_ENCODER
    case CMD_ENCODE:
      do_not_lru  = 1;
      input_func  = xd3_encode_input;
      output_func = main_write_output;

      if (option_use_checksum) { stream_flags |= XD3_ADLER32; }
      if (option_use_secondary)
        {
          /* The default secondary compressor is DJW, if it's compiled, being used, etc. */
          if (option_secondary == NULL)
            {
              if (SECONDARY_DJW) { stream_flags |= XD3_SEC_DJW; }
            }
          else
            {
              if (strcmp (option_secondary, "fgk") == 0 && SECONDARY_FGK)
                {
                  stream_flags |= XD3_SEC_FGK;
                }
              else if (strcmp (option_secondary, "djw") == 0 && SECONDARY_DJW)
                {
                  stream_flags |= XD3_SEC_DJW;
                }
              else
                {
                  XPR(NT "unrecognized secondary compressor type: %s\n", option_secondary);
                  return EXIT_FAILURE;
                }
            }
        }
      if (option_no_compress)      { stream_flags |= XD3_NOCOMPRESS; }
      if (option_use_altcodetable) { stream_flags |= XD3_ALT_CODE_TABLE; }
      if (option_smatch_config)
        {
          char *s = option_smatch_config, *e;
          int values[XD3_SOFTCFG_VARCNT];
          int got;

          config.smatch_cfg = XD3_SMATCH_SOFT;

          for (got = 0; got < XD3_SOFTCFG_VARCNT; got += 1, s = e + 1)
            {
              values[got] = strtol (s, &e, 10);

              if ((values[got] < 0) ||
                  (e == s) ||
                  (got < XD3_SOFTCFG_VARCNT-1 && *e == 0) ||
                  (got == XD3_SOFTCFG_VARCNT-1 && *e != 0))
                {
                  XPR(NT "invalid string match specifier (-C) %d: %s\n",
                      got, s);
                  return EXIT_FAILURE;
                }
            }

          config.smatcher_soft.large_look    = values[0];
          config.smatcher_soft.large_step    = values[1];
          config.smatcher_soft.small_look    = values[2];
          config.smatcher_soft.small_chain   = values[3];
          config.smatcher_soft.small_lchain  = values[4];
          config.smatcher_soft.max_lazy      = values[5];
          config.smatcher_soft.long_enough   = values[6];
        }
      else
        {
          if (option_verbose > 1)
            {
              XPR(NT "compression level: %d\n", option_level);
            }
          if (option_level == 0)
            {
              stream_flags |= XD3_NOCOMPRESS;
              config.smatch_cfg = XD3_SMATCH_FASTEST;
            }
          else if (option_level == 1) { config.smatch_cfg = XD3_SMATCH_FASTEST; }
          else if (option_level <= 5) { config.smatch_cfg = XD3_SMATCH_FAST; }
          else if (option_level == 6) { config.smatch_cfg = XD3_SMATCH_DEFAULT; }
          else                        { config.smatch_cfg = XD3_SMATCH_SLOW; }
        }
      break;
#endif
    case CMD_DECODE:
      if (option_use_checksum == 0) { stream_flags |= XD3_ADLER32_NOVER; }
      stream_flags  = 0;
      ifile->flags |= RD_NONEXTERNAL;
      input_func    = xd3_decode_input;
      output_func   = main_write_output;
      break;
    default:
      XPR(NT "internal error\n");
      return EXIT_FAILURE;
    }

  main_set_winsize (ifile);

  if ((main_bdata = main_malloc (option_winsize)) == NULL)
    {
      return EXIT_FAILURE;
    }

  if (IS_ENCODE (cmd))
    {
      /* When encoding, open the source file, possibly decompress it.  The decoder delays
       * this step until XD3_GOTHEADER. */
      if (sfile->filename != NULL && (ret = main_set_source (NULL, cmd, sfile, & source)))
        {
          return EXIT_FAILURE;
        }
    }

  config.winsize = option_winsize;
  config.srcwin_maxsz = option_srcwinsz;
  config.getblk = main_getblk_func;
  config.flags = stream_flags;

  if ((ret = xd3_config_stream (& stream, & config)))
    {
      XPR(NT XD3_LIB_ERRMSG (& stream, ret));
      return EXIT_FAILURE;
    }

  if (IS_ENCODE (cmd) && sfile->filename != NULL &&
      (ret = xd3_set_source (& stream, & source)))
    {
      XPR(NT XD3_LIB_ERRMSG (& stream, ret));
      return EXIT_FAILURE;
    }

  /* This times each window. */
  get_millisecs_since ();

  /* Main input loop. */
  do
    {
      xoff_t input_offset;
      xoff_t input_remain;
      usize_t try_read;

      input_offset = ifile->nread;

      input_remain = XOFF_T_MAX - input_offset;

      try_read = (usize_t) min ((xoff_t) config.winsize, input_remain);

      if ((ret = main_read_primary_input (ifile, main_bdata, try_read, & nread)))
        {
          return EXIT_FAILURE;
        }

      /* If we've reached EOF tell the stream to flush. */
      if (nread < try_read)
        {
          stream_flags |= XD3_FLUSH;
          xd3_set_flags (& stream, stream_flags);
        }

#if XD3_ENCODER
      /* After the first main_read_primary_input completes, we know all the information
       * needed to encode the application header. */
      if (cmd == CMD_ENCODE && (ret = main_set_appheader (& stream, ifile, sfile)))
        {
          return EXIT_FAILURE;
        }
#endif
      xd3_avail_input (& stream, main_bdata, nread);

      /* If we read zero bytes after encoding at least one window... */
      if (nread == 0 && stream.current_window > 0) {
        break;
      }

    again:
      ret = input_func (& stream);

      switch (ret)
        {
        case XD3_INPUT:
          continue;

        case XD3_GOTHEADER:
          {
            XD3_ASSERT (stream.current_window == 0);

            /* Need to process the appheader as soon as possible.  It may contain a
             * suggested default filename/decompression routine for the ofile, and it may
             * contain default/decompression routine for the sources. */
            if (cmd == CMD_DECODE)
              {
                int have_src = sfile->filename != NULL;
                int need_src = xd3_decoder_needs_source (& stream);
                int recv_src;

                /* May need to set the sfile->filename if none was given. */
                main_get_appheader (& stream, ifile, ofile, sfile);

                recv_src = sfile->filename != NULL;

                /* Check if the user expected a source to be required although it was not. */
                if (have_src && ! need_src && ! option_quiet)
                  {
                    XPR(NT "warning: output window %"Q"u does not copy source\n", stream.current_window);
                  }

                /* Check if we have no source name and need one. */
                /* TODO: this doesn't fire due to cpyblocks_ calculation check? */
                if (need_src && ! recv_src)
                  {
                    XPR(NT "input requires a source file, use -s\n");
                    return EXIT_FAILURE;
                  }

                /* Now open the source file. */
                if (need_src && (ret = main_set_source (& stream, cmd, sfile, & source)))
                  {
                    return EXIT_FAILURE;
                  }
              }
            else if (cmd == CMD_PRINTHDR ||
                     cmd == CMD_PRINTHDRS ||
                     cmd == CMD_PRINTDELTA)
              {
                if (xd3_decoder_needs_source (& stream) && sfile->filename == NULL)
                  {
                    allow_fake_source = 1;
                    sfile->filename = "<placeholder>";
                    main_set_source (& stream, cmd, sfile, & source);
                  }
              }
          }
        /* FALLTHROUGH */
        case XD3_WINSTART:
          {
            /* e.g., set or unset XD3_SKIP_WINDOW. */
            /* xd3_set_flags (& stream, stream_flags); */
            goto again;
          }

        case XD3_OUTPUT:
          {
            if (option_no_output == 0)
              {
                /* Defer opening the output file until the stream produces its first
                 * output for both encoder and decoder, this way we delay long enough for
                 * the decoder to receive the application header.  (Or longer if there are
                 * skipped windows, but I can't think of any reason not to delay open.) */

                if (! main_file_isopen (ofile) && (ret = main_open_output (& stream, ofile)) != 0)
                  {
                    return EXIT_FAILURE;
                  }
                if ((ret = output_func (& stream, ofile)) && (ret != PRINTHDR_SPECIAL))
                  {
                    return EXIT_FAILURE;
                  }
                if (ret == PRINTHDR_SPECIAL)
                  {
                    xd3_abort_stream (& stream);
                    ret = EXIT_SUCCESS;
                    goto done;
                  }
                ret = 0;
              }

            xd3_consume_output (& stream);
            goto again;
          }

        case XD3_WINFINISH:
          {
            if (IS_ENCODE (cmd) || cmd == CMD_DECODE)
              {
                if (! option_quiet && IS_ENCODE (cmd) && main_file_isopen (sfile))
                  {
                    /* Warn when no source copies are found */
                    if (! xd3_encoder_used_source (& stream))
                      {
                        XPR(NT "warning: input window %"Q"u..%"Q"u has no source copies\n",
                            stream.current_window * option_winsize,
                            (stream.current_window+1) * option_winsize);
                      }
                    
                    /* Limited instruction buffer size affects source copies */
                    if (option_verbose > 1 && stream.i_slots_used > stream.iopt_size)
                      {
                        XPR(NT "warning: input position %"Q"u overflowed instruction buffer, "
                            "needed %u (vs. %u), consider raising -I\n",
                            stream.current_window * option_winsize,
                            stream.i_slots_used, stream.iopt_size);
                      }
                  }

                if (option_verbose)
                  {
                    char rrateavg[32], wrateavg[32], tm[32];
                    char rdb[32], wdb[32];
                    char trdb[32], twdb[32];
                    long millis = get_millisecs_since ();
                    usize_t this_read = (usize_t)(stream.total_in - last_total_in);
                    usize_t this_write = (usize_t)(stream.total_out - last_total_out);
                    last_total_in = stream.total_in;
                    last_total_out = stream.total_out;

                    if (option_verbose > 1)
                      {
                        XPR(NT "%"Q"u: in %s (%s): out %s (%s): total in %s: out %s: %s\n",
                            stream.current_window,
                            main_format_bcnt (this_read, rdb),
                            main_format_rate (this_read, millis, rrateavg),
                            main_format_bcnt (this_write, wdb),
                            main_format_rate (this_write, millis, wrateavg),
                            main_format_bcnt (stream.total_in, trdb),
                            main_format_bcnt (stream.total_out, twdb),
                            main_format_millis (millis, tm));
                      }
                    else
                      {
                        XPR(NT "%"Q"u: in %s: out %s: total in %s: out %s: %s\n",
                            stream.current_window,
                            main_format_bcnt (this_read, rdb),
                            main_format_bcnt (this_write, wdb),
                            main_format_bcnt (stream.total_in, trdb),
                            main_format_bcnt (stream.total_out, twdb),
                            main_format_millis (millis, tm));
                      }
                  }
              }
            goto again;
          }

        default:
          /* input_func() error */
          XPR(NT XD3_LIB_ERRMSG (& stream, ret));
          return EXIT_FAILURE;
        }
    }
  while (nread == config.winsize);
done:
  /* Close the inputs. (ifile must be open, sfile may be open) */
  main_file_close (ifile);
  main_file_close (sfile);

  /* If output file is not open yet because of delayed-open, it means we never encountered
   * a window in the delta, but it could have had a VCDIFF header?  TODO: solve this
   * elsewhere.  For now, it prints "nothing to output" below, but the check doesn't
   * happen in case of option_no_output.  */
  if (! option_no_output)
    {
      if (!stdout_only && ! main_file_isopen (ofile))
        {
          XPR(NT "nothing to output: %s\n", ifile->filename);
          return EXIT_FAILURE;
        }

      /* Have to close the output before calling main_external_compression_finish, or else it hangs. */
      if (main_file_close (ofile) != 0)
        {
          return EXIT_FAILURE;
        }
    }

#if EXTERNAL_COMPRESSION
  if ((ret = main_external_compression_finish ()))
    {
      XPR(NT "external compression commands failed\n");
      return EXIT_FAILURE;
    }
#endif

  if ((ret = xd3_close_stream (& stream)))
    {
      XPR(NT XD3_LIB_ERRMSG (& stream, ret));
      return EXIT_FAILURE;
    }

  if (option_verbose > 1)
    {
      XPR(NT "scanner configuration: %s\n", stream.smatcher.name);
      XPR(NT "target hash table size: %u\n", stream.small_hash.size);
      if (sfile->filename != NULL)
        {
          XPR(NT "source hash table size: %u\n", stream.large_hash.size);
        }
    }

  if (option_verbose > 2)
    {
      XPR(NT "source copies: %"Q"u (%"Q"u bytes)\n", stream.n_scpy, stream.l_scpy);
      XPR(NT "target copies: %"Q"u (%"Q"u bytes)\n", stream.n_tcpy, stream.l_tcpy);
      XPR(NT "adds: %"Q"u (%"Q"u bytes)\n", stream.n_add, stream.l_add);
      XPR(NT "runs: %"Q"u (%"Q"u bytes)\n", stream.n_run, stream.l_run);
    }

  xd3_free_stream (& stream);

  if (option_verbose)
    {
      char tm[32];
      long end_time = get_millisecs_now ();
      XPR(NT "finished in %s; input %"Q"u output %"Q"u bytes  (%0.2f%%)\n",
          main_format_millis (end_time - start_time, tm),
          ifile->nread, ofile->nwrite,
          100.0 * ofile->nwrite / ifile->nread);
    }

  return EXIT_SUCCESS;
}

/* free memory before exit, reset single-use variables. */
static void
main_cleanup (void)
{
  int i;

  if (appheader_used != NULL &&
      appheader_used != option_appheader)
    {
      main_free (appheader_used);
      appheader_used = NULL;
    }

  main_free (main_bdata);
  main_bdata = NULL;

#if EXTERNAL_COMPRESSION
  main_free (ext_tmpfile);
  ext_tmpfile = NULL;
#endif

  for (i = 0; lru && i < lru_size; i += 1)
    {
      main_free (lru[i].blk);
    }

  main_free (lru);
  lru = NULL;

  lru_hits = 0;
  lru_misses = 0;
  lru_filled = 0;

  XD3_ASSERT (main_mallocs == 0);
}

static void
setup_environment (int argc,
                   char **argv,
                   int *argc_out,
                   char ***argv_out,
                   char ***argv_free,
                   char **env_free)
{
  int n, i, i0;
  char *p, *v = getenv("XDELTA");
  if (v == NULL) {
    (*argc_out) = argc;
    (*argv_out) = argv;
    (*argv_free) = NULL;
    (*env_free) = NULL;
    return;
  }

  (*env_free) = main_malloc(strlen(v) + 1);
  strcpy(*env_free, v);

  /* Space needed for extra args, at least # of spaces */
  n = argc + 1;
  for (p = *env_free; *p != 0; ) {
    if (*p++ == ' ') {
      n++;
    }
  }

  (*argv_free) = main_malloc(sizeof(char*) * (n + 1));
  (*argv_out) = (*argv_free);
  (*argv_out)[0] = argv[0];
  (*argv_out)[n] = NULL;

  i = 1;
  for (p = *env_free; *p != 0; ) {
    (*argv_out)[i++] = p;
    while (*p != ' ' && *p != 0) {
      p++;
    }
    while (*p == ' ') {
      *p++ = 0;
    }
  }

  for (i0 = 1; i0 < argc; i0++) {
    (*argv_out)[i++] = argv[i0];
  }

  /* Counting spaces is an upper bound, argv stays NULL terminated. */
  (*argc_out) = i;
  while (i <= n) {
    (*argv_out)[i++] = NULL;
  }
}

int
#if PYTHON_MODULE || SWIG_MODULE
xd3_main_cmdline (int argc, char **argv)
#else
main (int argc, char **argv)
#endif
{
  xd3_cmd cmd;
  main_file ifile;
  main_file ofile;
  main_file sfile;
  static const char *flags = "0123456789cdefhnqvDJNORTVs:B:C:E:F:I:L:O:M:P:W:A::S::";
  int my_optind;
  char *my_optarg;
  char *my_optstr;
  char *sfilename;
  int env_argc;
  char **env_argv;
  char **free_argv;  /* malloc() in setup_environment() */
  char *free_value;  /* malloc() in setup_environment() */
  int ret;

#ifdef _WIN32
  GetStartupInfo(&winStartupInfo);
  setvbuf(stderr, NULL, _IONBF, 0);  /* Do not buffer stderr */
#endif

  main_file_init (& ifile);
  main_file_init (& ofile);
  main_file_init (& sfile);

  reset_defaults();

  free_argv = NULL;
  free_value = NULL;
  setup_environment(argc, argv, &env_argc, &env_argv, &free_argv, &free_value);
  cmd = CMD_NONE;
  sfilename = NULL;
  my_optind = 1;
  argv = env_argv;
  argc = env_argc;
  program_name = env_argv[0];
  extcomp_types[0].recomp_cmdname = program_name;
  extcomp_types[0].decomp_cmdname = program_name;
 takearg:
  my_optarg = NULL;
  my_optstr = argv[my_optind];
  /* This doesn't use getopt() because it makes trouble for -P & python which reenter
   * main() and thus care about freeing all memory.  I never had much trust for getopt
   * anyway, it's too opaque.  This implements a fairly standard non-long-option getopt
   * with support for named operations (e.g., "xdelta3 [encode|decode|printhdr...] < in >
   * out"). */
  if (my_optstr)
    {
      if (*my_optstr == '-')    { my_optstr += 1; }
      else if (cmd == CMD_NONE) { goto nonflag; }
      else                      { my_optstr = NULL; }
    }
  while (my_optstr)
    {
      char *s;
      my_optarg = NULL;
      if ((ret = *my_optstr++) == 0) { my_optind += 1; goto takearg; }

      /* Option handling: first check for one ':' following the option in flags, then
       * check for two.  The syntax allows:
       *
       * 1. -Afoo                   defines optarg="foo"
       * 2. -A foo                  defines optarg="foo"
       * 3. -A ""                   defines optarg="" (allows optional empty-string)
       * 4. -A [EOA or -moreargs]   error (mandatory case)
       * 5. -A [EOA -moreargs]      defines optarg=NULL (optional case)
       * 6. -A=foo                  defines optarg="foo"
       * 7. -A=                     defines optarg="" (mandatory case)
       * 8. -A=                     defines optarg=NULL (optional case)
       *
       * See tests in test_command_line_arguments().
       */
      s = strchr (flags, ret);
      if (s && s[1] && s[1] == ':')
        {
          int eqcase = 0;
          int option = s[2] && s[2] == ':';

          /* Case 1, set optarg to the remaining characters. */
          my_optarg = my_optstr;
          my_optstr = "";

          /* Case 2-5 */
          if (*my_optarg == 0)
            {
              /* Condition 4-5 */
              int have_arg = my_optind < (argc - 1) && *argv[my_optind+1] != '-';

              if (! have_arg)
                {
                  if (! option)
                  {
                    /* Case 4 */
                    XPR(NT "-%c: requires an argument\n", ret);
                    ret = EXIT_FAILURE;
                    goto cleanup;
                  }
                  /* Case 5. */
                  my_optarg = NULL;
                }
              else
                {
                  /* Case 2-3. */
                  my_optarg = argv[++my_optind];
                }
            }
          /* Case 6-8. */
          else if (*my_optarg == '=')
            {
              /* Remove the = in all cases. */
              my_optarg += 1;
              eqcase = 1;

              if (option && *my_optarg == 0)
                {
                  /* Case 8. */
                  my_optarg = NULL;
                }
            }
        }

      switch (ret)
        {
        /* case: if no '-' was found, maybe check for a command name. */
        nonflag:
               if (strcmp (my_optstr, "decode") == 0) { cmd = CMD_DECODE; }
          else if (strcmp (my_optstr, "encode") == 0)
            {
#if XD3_ENCODER
              cmd = CMD_ENCODE;
#else
              XPR(NT "encoder support not compiled\n");
              return EXIT_FAILURE;
#endif
            }
          else if (strcmp (my_optstr, "config") == 0) { cmd = CMD_CONFIG; }
#if REGRESSION_TEST
          else if (strcmp (my_optstr, "test") == 0) { cmd = CMD_TEST; }
#endif
#if VCDIFF_TOOLS
          else if (strcmp (my_optstr, "printhdr") == 0) { cmd = CMD_PRINTHDR; }
          else if (strcmp (my_optstr, "printhdrs") == 0) { cmd = CMD_PRINTHDRS; }
          else if (strcmp (my_optstr, "printdelta") == 0) { cmd = CMD_PRINTDELTA; }
#endif

          /* If no option was found and still no command, let the default command be
           * encode.  The remaining args are treated as filenames. */
          if (cmd == CMD_NONE)
            {
              cmd = CMD_DEFAULT;
              my_optstr = NULL;
              break;
            }
          else
            {
              /* But if we find a command name, continue the getopt loop. */
              my_optind += 1;
              goto takearg;
            }

          /* gzip-like options */
        case '0': case '1': case '2': case '3': case '4':
        case '5': case '6': case '7': case '8': case '9':
          option_level = ret - '0';
          break;
        case 'f': option_force = 1; break;
        case 'v': option_verbose += 1; option_quiet = 0; break;
        case 'q': option_quiet = 1; option_verbose = 0; break;
        case 'c': option_stdout = 1; break;
        case 'd':
          if (cmd == CMD_NONE) { cmd = CMD_DECODE; }
          else { ret = main_help (); goto exit; }
          break;
        case 'e':
#if XD3_ENCODER
          if (cmd == CMD_NONE) { cmd = CMD_ENCODE; }
          else { ret = main_help (); goto exit; }
          break;
#else
          XPR(NT "encoder support not compiled\n");
          return EXIT_FAILURE;
#endif

        case 'n': option_use_checksum = 0; break;
        case 'N': option_no_compress = 1; break;
        case 'T': option_use_altcodetable = 1; break;
        case 'C': option_smatch_config = my_optarg; break;
        case 'J': option_no_output = 1; break;
        case 'S': if (my_optarg == NULL) { option_use_secondary = 0; }
                  else { option_use_secondary = 1; option_secondary = my_optarg; } break;
        case 'A': if (my_optarg == NULL) { option_use_appheader = 0; }
                  else { option_appheader = (uint8_t*) my_optarg; } break;
        case 'B':
          if ((ret = main_atou (my_optarg, & option_srcwinsz, XD3_MINSRCWINSZ,
                                0, 'B')))
            {
              goto exit;
            }
          break;
        case 'I':
          if ((ret = main_atou (my_optarg, & option_iopt_size, 0,
                                0, 'I')))
            {
              goto exit;
            }
          break;
        case 'P':
          if ((ret = main_atou (my_optarg, & option_sprevsz, 0,
                                0, 'P')))
            {
              goto exit;
            }
          break;
        case 'W':
          if ((ret = main_atou (my_optarg, & option_winsize, XD3_ALLOCSIZE,
                                XD3_HARDMAXWINSIZE, 'W')))
          {
            goto exit;
          }
          break;
        case 'D':
#if EXTERNAL_COMPRESSION == 0
          if (option_verbose > 0)
            {
              XPR(NT "warning: -D option ignored, "
                       "external compression support was not compiled\n");
            }
#else
          option_decompress_inputs  = 0;
#endif
          break;
        case 'R':
#if EXTERNAL_COMPRESSION == 0
          if (option_verbose > 0)
            {
              XPR(NT "warning: -R option ignored, "
                       "external compression support was not compiled\n");
            }
#else
          option_recompress_outputs = 0;
#endif
          break;
        case 's':
          if (sfilename != NULL)
            {
              XPR(NT "specify only one source file\n");
              goto cleanup;
            }

          sfilename = my_optarg;
          break;

        case 'V':
          ret = main_version (); goto exit;
        default:
          ret = main_help (); goto exit;
        }
    }

  option_source_filename = sfilename;

  /* In case there were no arguments, set the default command. */
  if (cmd == CMD_NONE) { cmd = CMD_DEFAULT; }

  argc -= my_optind;
  argv += my_optind;

  /* There may be up to two more arguments. */
  if (argc > 2)
    {
      XPR(NT "too many filenames: %s ...\n", argv[2]);
      ret = EXIT_FAILURE;
      goto cleanup;
    }

  ifile.flags    = RD_FIRST;
  sfile.flags    = RD_FIRST;
  sfile.filename = option_source_filename;

  /* The infile takes the next argument, if there is one.  But if not, infile is set to
   * stdin. */
  if (argc > 0)
    {
      ifile.filename = argv[0];

      if ((ret = main_file_open (& ifile, ifile.filename, XO_READ)))
        {
          goto cleanup;
        }
    }
  else
    {
      XSTDIN_XF (& ifile);
    }

  /* The ofile takes the following argument, if there is one.  But if not, it is left NULL
   * until the application header is processed.  It will be set in main_open_output. */
  if (argc > 1)
    {
      /* Check for conflicting arguments. */
      if (option_stdout && ! option_quiet)
        {
          XPR(NT "warning: -c option overrides output filename: %s\n", argv[1]);
        }

      if (! option_stdout) { ofile.filename = argv[1]; }
    }

  switch (cmd)
    {
    case CMD_PRINTHDR:
    case CMD_PRINTHDRS:
    case CMD_PRINTDELTA:
#if XD3_ENCODER
    case CMD_ENCODE:
#endif
    case CMD_DECODE:
      ret = main_input (cmd, & ifile, & ofile, & sfile);
      break;

#if REGRESSION_TEST
    case CMD_TEST:
      ret = xd3_selftest ();
      break;
#endif

    case CMD_CONFIG:
      ret = main_config ();
      break;

    default:
      ret = main_help ();
      break;
    }

#if EXTERNAL_COMPRESSION
  if (ext_tmpfile != NULL)
    {
      unlink (ext_tmpfile);
    }
#endif

  if (0)
    {
    cleanup:
      ret = EXIT_FAILURE;
    exit:
      (void)0;
    }

  main_file_cleanup (& ifile);
  main_file_cleanup (& ofile);
  main_file_cleanup (& sfile);

  main_free (free_argv);
  main_free (free_value);

  main_cleanup ();

  fflush (stdout);
  fflush (stderr);
  return ret;
}

static int
main_help (void)
{
  /* Note: update wiki when command-line features change */
  main_version ();
  DP(RINT "usage: xdelta3 [command/options] [input [output]]\n");
  DP(RINT "special command names:\n");
  DP(RINT "    config      prints xdelta3 configuration\n");
  DP(RINT "    decode      decompress the input\n");
  DP(RINT "    encode      compress the input%s\n", XD3_ENCODER ? "" : " [Not compiled]");
#if REGRESSION_TEST
  DP(RINT "    test        run the builtin tests\n");
#endif
#if VCDIFF_TOOLS
  DP(RINT "special commands for VCDIFF inputs:\n");
  DP(RINT "    printdelta  print information about the entire delta\n");
  DP(RINT "    printhdr    print information about the first window\n");
  DP(RINT "    printhdrs   print information about all windows\n");
#endif
  DP(RINT "standard options:\n");
  DP(RINT "   -0 .. -9     compression level\n");
  DP(RINT "   -c           use stdout\n");
  DP(RINT "   -d           decompress\n");
  DP(RINT "   -e           compress%s\n", XD3_ENCODER ? "" : " [Not compiled]");
  DP(RINT "   -f           force overwrite\n");
  DP(RINT "   -h           show help\n");
  DP(RINT "   -q           be quiet\n");
  DP(RINT "   -v           be verbose (max 2)\n");
  DP(RINT "   -V           show version\n");

  DP(RINT "memory options:\n");
  DP(RINT "   -B bytes     source window size\n");
  DP(RINT "   -W bytes     input window size\n");
  DP(RINT "   -P size      compression duplicates window\n");
  DP(RINT "   -I size      instruction buffer size (0 = unlimited)\n");

  DP(RINT "compression options:\n");
  DP(RINT "   -s source    source file to copy from (if any)\n");
  DP(RINT "   -S [djw|fgk] enable/disable secondary compression\n");
  DP(RINT "   -N           disable small string-matching compression\n");
  DP(RINT "   -D           disable external decompression (encode/decode)\n");
  DP(RINT "   -R           disable external recompression (decode)\n");
  DP(RINT "   -n           disable checksum (encode/decode)\n");
  DP(RINT "   -C           soft config (encode, undocumented)\n");
  DP(RINT "   -A [apphead] disable/provide application header (encode)\n");

#if XD3_DEBUG > 0
  DP(RINT "developer options:\n");
  DP(RINT "   -J           disable output (check/compute only)\n");
  DP(RINT "   -P           repeat count (for profiling)\n");
  DP(RINT "   -T           use alternate code table\n");
#endif

  DP(RINT "the XDELTA environment variable may contain extra args:\n");
  DP(RINT "   XDELTA=\"-s source-x.y.tar.gz\" \\\n");
  DP(RINT "   tar --use-compress-program=xdelta3 \\\n");
  DP(RINT "       -cf target-x.z.tar.gz.vcdiff target-x.y/\n");
  return EXIT_FAILURE;
}

Revision:	185
Committed:	Mon May 21 18:48:22 2007 UTC (18 years, 4 months ago) by geyser
Content type:	text/x-chdr
File size:	89429 byte(s)
Log Message: